Shenzhen Heguang Lighting Co., Ltd.
Shenzhen Heguang Lighting Co., Ltd. 17 Years LED Pool Light Manufacturer 86-755-81785630-827 info@hgled.net
Add to Cart
25W abs surface mounted led swimming pool lights rgb LED swimming pool lights
Hanging light Features:
● Use for Fiberglass pool;
● Material: Engineering ABS light body + Anti-UV PC cover;
● VDE standard rubber thread, cable length :2M
● IP68 Structure waterproof;
● RGB synchronous control design,2 wires connection,AC power supply design, 50/60HZ
● 38mil high bright 3W LED;
● Beam angle: 120°
● Warranty: 2 years
| Model | HG-PL-18X3W-F1-T | |
| Electrical | Voltage | AC12V |
| Current | 2860ma | |
| Wattage | 25W±10% | |
| LED | LED chip | 38mil High light 3W |
| LED QTY | 18PCS | |
| CCT | R:620-630nm,G:515-525nm,B:460-470nm | |
| Lumen | 1200LM±10％ | |
| Beam angle | 120° | |
| Light dimension | Φ290×85mm | |
R&D TEAM-improved the current products and developed new products,we have rich ODM
/OEM experience,Heguang always insist 100% original design for private mode , we will
constantly develop new products to adapt the market request and provide customers with
comprehensive and intimate product solutions to ensure worry-free after-sales !
Production line-3 assembly lines with the production capacity 50000 sets/month,well trained
workers,standard working manual and strict testing procedure,professional packing, assure that
all the clients qualified order delivery on time!
QC TEAM-accordance with ISO9001 quality certification management system,all products with
30 steps strict inspections before shipment,raw material inspection standard:AQL,finished products
inspection standard:GB/2828.1-2012. the main testing:electronic testing,led aging testing,IP68
waterproof testing,etc.Strict inspections assure all the clients get the qualified products!
WE HAVE STRONG TEAM TO SUPPORT OUR LONG-TERM GOOD COOPERATION !
Hanging light All passed 30 steps quality control , 100% waterproof at 10m depth, 8 hours LED
agening test,100% inspection before deliver.
FAQ
How do I change the LED light in my pool?
Change the LED light in your pool by first ensuring that the power is disconnected to your lighting
system. Turn the power off from the mains and double-check by using the light switches. Unscrew
the light fitting, remove it from the pool wall and pull the fitting out of the water onto the surround.
Remove the cover of the light fitting and replace the light bulb. Refit the cover and ensure that it is
watertight before fitting back onto your pool.
Do pool lights use a lot of electricity?
The amount of electricity that your pool lights use will depend on their wattage. For example,
a 300W incandescent light used for 8 hours a day, 365 days a year will consume 876 kWh.
Whereas a 40W LED light used for the same time will only consume 116.8 kWh.
Do LED pool lights get hot?
LED pool lights do not get hot in the same way that incandescent bulbs do. There are no
filaments inside LED lights, so they produce much less heat than incandescent bulbs. This
contributes to their overall efficiency, although they may still get warm to the touch.
Are LED pool lights as bright as incandescent?
LED pool lights are just as bright as incandescent pool lights, whilst using significantly less power.
How deep should pool lights be?
Pool lights should be placed at a depth of 9-12 inches below the waterline. There are exceptions to
this when fitting lights to stairs, or in cases where swimming pools are extra deep.
How many lights are needed for an inground pool?
The number of lights needed for an inground pool is dependant on the length of your swimming pool
and the power of the lights that you are installing. In some cases, only two LED lights may be
necessary to light a small domestic pool, however, your design requirements may necessitate more.
How do underwater pool lights work?
Underwater pool lights function in the same way as normal lighting, the only difference being the air-tight
casing and extra thick glass or plastic which prevents water from entering the light fixture.